Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

What is command to copy Bin File to New flash card

Status
Not open for further replies.

loveroots

Technical User
Joined
Jul 16, 2002
Messages
115
Location
US
Hi I have just replace the flash card on a 2821 router from the default 64mb to 128mb. I now need the procedure to copy the old bin file over to the new 128mb flash card so the router could bootproperly. right now it boots in Rommon. I have new done this before so I would need full explaination.
 
if all else fails, use xmodem like I did---at 9600 baud, it does take a BIT longer...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top