So I ended up with one of the 1616Is that fell victim to the default mac address problem. If I take this phone and plug it in on the same network that a customer's 8.1.73 is on it knocks all of the other 1616s off the network and locks up.
I was messing around on an old 7.0 bench system and for giggles I put this phone on the same network. The phone comes up and you can enter the call server/file server info and restart the phone. Then it registers with the ip office gets an endpoint license and shows 6020 on the display. I have no ext/user 6020. The phone works but will not let me default it. Made a User/Ext 222 and assigned an IP and reserved an endpoint license. Entered info in phone restarted and it comes back as 6020 again. Anyone made it any farther on this?
I was messing around on an old 7.0 bench system and for giggles I put this phone on the same network. The phone comes up and you can enter the call server/file server info and restart the phone. Then it registers with the ip office gets an endpoint license and shows 6020 on the display. I have no ext/user 6020. The phone works but will not let me default it. Made a User/Ext 222 and assigned an IP and reserved an endpoint license. Entered info in phone restarted and it comes back as 6020 again. Anyone made it any farther on this?