Feb 12, 2003 #1 Lonnyb MIS Joined Aug 21, 2002 Messages 38 Location US How do I turn on the web GUI through the command line programming so I can administer my switches through the web browser?
How do I turn on the web GUI through the command line programming so I can administer my switches through the web browser?
Feb 13, 2003 #2 jgercken MIS Joined Feb 13, 2002 Messages 304 Location US I really wouldn't recommend doing it that way but if you insist add line: ip http server -Jeff ---------------------------------------- Wasabi Pop Tarts! Write Kellogs today! Upvote 0 Downvote
I really wouldn't recommend doing it that way but if you insist add line: ip http server -Jeff ---------------------------------------- Wasabi Pop Tarts! Write Kellogs today!
Feb 14, 2003 #3 SoyGalesa MIS Joined Dec 21, 2002 Messages 22 Location GB Sorry, a bit confused. Which bit would you not do? Manage it through the Web Interface or turn it on at the command line? And why not? Upvote 0 Downvote
Sorry, a bit confused. Which bit would you not do? Manage it through the Web Interface or turn it on at the command line? And why not?
Feb 18, 2003 #4 marks66 Technical User Joined Jun 7, 2001 Messages 65 Location GB Cisco IOS has know security issues when running HTTP server, for GUI access. Upvote 0 Downvote