Warehouse entry system / door phone

[klmnop]

I would like to spec out what's needed to set up an exterior analog door phone, which will ring to an IP wireless phone. The person with the wireless phone could either press a button or dial an access code, which would provide contact closure and trip the door release relay. Does this solution look like it would work or am I missing components?

Analog Door Phone: Bogen ADP1
Connected to analog port 1 on G350 via telephone wire.
Power source: telephone line.


In server room:
UPAM universal paging access module. (I have one laying around, not sure of model)
Power required?
Connected to analog port 2 on G350
Provides contact closure to door release system when ringing applied.
Connected to door release system via telephone line.


Please advise programming needed to make this work (CM 2.1)

Thanks!

 

[4merAvaya]

You can use an analog phone configure with the 'hotline' feature. Hotline will automatically dial an entry in the abbreviated dial list for that station. That will ring the wireless station.

As far as opening the door: You can assign an analog station and connect it to a Wheelock relay. The Wheelock relay can respond to ringing current, operate the relay, and provide a contact closure. That would have to be connected to your door locking system.

Kevin

http://www.cooperwheelock.com/