VPN shows connected but not able to browse or acess network

[rocketlauncher]

Hi Guys,

Hope you can help me with this one.

I'm trying to connect to my network thru VPN connetion using the following configuration:

- Cisco VPN Client 4.6.02.0011
- PIX 515E
- Users authenticate thru RADIUS server (Behind firewall)
- Using class A ip addressing pool

I've configured the PIX following the instructions on cisco site docuemtation and I'm able to authenticate the users (checked event viewer on RADIUs server and see the user has been successfully authenticated) and the connections status shows "Connected". But I'm not able to browse or access any resources on the remote network.

I've done some troubleshooting trying to ping and it times out, also I've done tracert but get the same result. I've tried the suggestions from other articles on the forum but none seem to do the trick.

Any suggestion are truly appreciate.

Thanks in advance.

Rocket.

 

[fdurham]

Rocket-

If you can post your config for your PIX, that would help out. If you want to x out all external public IP addresses. The more eyes on it the better.

Frank

 

[rocketlauncher]

Hi fdurham,

I really appreciate your response, but I finally got it working.

It turns out that the cause was a remote SOHO cisco router that was not allowing the traffic back into the network.

Thanks again.

Rocket

 

[fdurham]

Rocket-

Glad you got it working.

Frank