VPN Problem !

[netwalker1]

Site1 is working with PIX 525 and Firewall Version 6.3(3)

Site2 is working with PIX 525 and Firewall version 7.0


The VPN is created without problems between the 2 sites but the connection is really heavy and the Site2 is not able to connect to any of Site1 Servers ..


We make Test-1 and remove the Firewall from Site2 , and connect back-to-back to the router and the connection was good with Site1 ( conclusion : no problem in the connection )

We make Test-2 and connect the Firewall and then connected back-to-back to the Firewall at Site2 and started to connect to Site1 , at the beginning everything was working fine but then the connection started to degraded till it completely stopped ! the VPN is established but no traffic is being passed !

Any Advise how to solve this problem … ?






Mohamed Farid
[green]Know Me No Pain , No Me Know Pain !!![/green]

 

[mitmont]

Does anyone have an answer for this post and Mohamed did you get the solution?

Dave

 

[NetworkGhost]

Show configs for the sites. Also do a sh int on your screen routers interface to see if it is taking errors on the line.

 

[speedingwolf]

My .02 cents. Check on the PIX CPU counters

 

[netwalker1]

I solved it by removing pfs from the VPN Configuration ...

Mohamed Farid
[green]Know Me No Pain , No Me Know Pain !!![/green]