Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VPN into NT4 server through CISCO 2610 and PIX

Status
Not open for further replies.
ccctait

ccctait

MIS
Aug 31, 2001
1
US
In theory I believe I can do the following: Dial-in to my local ISP from home then make a VPN connection to my work CISCO 2610 router and PIX firewall into my work NT4 LAN without adding any other hardware. In essence, a software VPN using NT security only. Question #1 Can this be done? Question #2 Do I make changes to my 2610 or my PIX or both? Question #3 What are those changes/settings/ports? I have read all I can find but mostly the discussion is too far off from my particular setup to be truly relevant.

Thanks for any and all help.
 
Status
Not open for further replies.

Similar threads

teknance
  • Locked
  • Question
Discovering Portugal: Uncover Hidden Destinations and VPN Solutions
Replies
5
Views
953
GlobeTrekkerGal
GlobeTrekkerGal
sarahz2
  • Locked
  • Question
Best vpn safe and fast
Replies
4
Views
723
GlobeTrekkerGal
GlobeTrekkerGal
MP2023
  • Locked
  • Question
How to Create an site to site VPN
Replies
1
Views
628
sircles
sircles
ramblingrebel
  • Locked
  • Question
Built-in Windows 10 VPN
Replies
1
Views
610
Joon Smith
Joon Smith
LearningNetworking
  • Locked
  • Question
Linking Hosts on the same subnet via VPN
Replies
0
Views
611
LearningNetworking
LearningNetworking

Part and Inventory Search

Sponsor

Back
Top