Just wondering if there was a way to delay a call transfer in VMPro. Here is the situation..User wants Valcom amplifier to send a tone to speakers followed by the page. Have a shortcode/callflow to pulse door relay followed by a transfer to the paging extension. Problem is the transfer is completed immediately after tripping the door relay and the voice page overrides the Valcom tone...i.e. no page tone just voice page. Need to delay the transfer 3-5 seconds to allow page tone to be followed by voice page. Am I on the right track or am I all wet??? Thanks.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!