vmpro PIN in meet me module

[jeepguy267]

This is an existing setup I am trying to work out 1 specific piece. Meet me works for creating and joining bridges using the 555xxxx format. When calling from outside to create or join a bridge there is an auto attendant where you can enter as participant or moderator. Moderator leg of the call flow has actions where PIN number is created and/or checked. I am having trouble determining what the PIN is our how it is generated. I have screen shots of the generic action and module in the attached link to a pdf Link

they are using generic actions with $CP0 and such that I have not seen before. To me it looks like the PIN is the caller ID of the phone you are calling from, but I am not having any luck.

 

[robboardman]

follow the *7277 it is *pass and sets the moderator pin as the voice mail call back number in the users source number

Robb

 

[jeepguy267]

Robb thanks. The module referenced in that action tab is non existent. Likely an imported that didn't bring everything over. Do you have anything I cam reference to rebuild that piece?

 

[TouchToneTommy]

I think the module you're working with was designed by Kyle Holladay, and is part of his Standardized Base Configuration - doownload it here. Unzip it, and import the voicemail.mdb file to get all of the modules, and see what's going on.