VM Pro condition editor on app server - weirdness?

[Greybeard191]

Just wondering... has anyone run into any 'weirdness" with using the condition editor for VM pro on the app server R7?

I've done a fair bit of playing, and I'm getting EXTREMELY inconsistent behavior particular to the calendar portion of it. Seems like setting a date as a stat "sticks", and it cannot be undone.

I've tried using a 'stacked' single test condition action (where week planner and calendar as linked in the condition editor), and i've also tried using a pair of test conditions with appropriate true and falses linked to the correct places.

Tried multiple compbinations, fiddled with all the logic options, and my tried and true 'stacked' verion that I've used in multiple windows servers doesn't work.

I'm getting by it by using the IPO for time profiles, but this seems to be an app server specific issue, at least to me.

Anyone else seen this?

 

[tlpeter]

When i double click on it then it is back.
Is that your issue or does it still work even when it is not green anymore?


BAZINGA!

I'm not insane, my mother had me tested!

 

[Greybeard191]

It appears like the stat gets put in and them removed correctly... e.g. I can go back into the calendar and the stat is no longer green.

But it's behaving as though the stat is still there, e.g. following the route as though the stat was still in place.

The weekly planner part seems to work fine on its own, but using the calendar with alone, or in conjunction with the weekly planner (either in a combined test condition or as two separate time conditions feeding into each other) doesn't work... it sticks.

GB

 

[tlpeter]

I tried it once on the Linux VMPro and it worked fine then.
We will see what happens


BAZINGA!

I'm not insane, my mother had me tested!

 

[tlpeter]

Isn't it like this issue:

http://www.tek-tips.com/viewthread.cfm?qid=1642347&page=1

BAZINGA!

I'm not insane, my mother had me tested!