aleonhardt
Technical User
Hi !
I've got a problem with configuring the Catalyst to allow traffic to the PIX from the "normal" network and from a dedicated port where a webserver is supposed to be.
I know that I need to put the interface the PIX is connected to into trunk mode and the interface for the server should be working with normal "access" mode but for some reason, each time I enable the trunk ( ils or dot1q ) it just drops all packets to the PIX.
Anybody has an example config ?
Thanks !
Alex
I've got a problem with configuring the Catalyst to allow traffic to the PIX from the "normal" network and from a dedicated port where a webserver is supposed to be.
I know that I need to put the interface the PIX is connected to into trunk mode and the interface for the server should be working with normal "access" mode but for some reason, each time I enable the trunk ( ils or dot1q ) it just drops all packets to the PIX.
Anybody has an example config ?
Thanks !
Alex