Phoneyguy1
Technical User
We just got finished upgrading to 5.0 w/ FIJI. Now the video conferancing won't connect. We have connected at 64K but not at 128 or higher.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Video Conferancing not working after 5.0 upgrade
- Thread starter Phoneyguy1
- Start date
- Status
Found out today that on DSN S/W Release 5.0 there was a problem with no video on BRIs. Nortel found that patch MPLR26045 had to be removed from the switch to fix the issue. I'm not sure this is relevant to your situation but thought it might be helpful.
War Eagle!
Lions Baseball '09!
War Eagle!
Lions Baseball '09!
OrlandoGuy82
Technical User
For us, and we may all be on the same team here it seems. After patch MPLR26045 was removed problems persisted with the circuits. Occasionally they will lock up. It appears to only be on circuits coming from the ULIC cards that are located behind BRSC cards. The CS1000 also has ULIC cards that are only behind the MISP card. These work flawlessly. MISP cards have been swapped as have the BRSC cards. The problem persist. This is Jeremy, btw.
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question