VIC requirements 1

[pmoorey]

Hi,

I have VIC2FXS, and VIC2FXO cards and I have a Cisco 2600, which IOS will I require to run these VICs, and do the VICs have to be plugged into a NM module? I had a look at the feature navigator without luck. The router is for a CCVP lab.

Thanks in advance!

Peter
CCNA, Cisco Qualified Specialist

 

[DEADbyWEDNESDAY]

youll need adequate dsp and system memory.

you want to run the latest IOS that your hardware can support.

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/prod_bulletin09186a00801abfda.html

this is what i run on my 1760 home lab. I have vic2fxo hooked to vonage. I dont have enough DSP to to run the FXS so i bought ata186and 188