Thanks gnrslash4life
I think I have it, but I want to be sure...
(and Tek-Tips is a lot faster than Tech Support)
Cisco says I need 128MB DRAM and 64MB FLASH
Can anyone confirm from my show hardware below ?
B1F2R220-VoIPATAPre1#show hardware
Cisco IOS Software, vg224 Software (vg224-I6S-M), Version 12.4(22)T5, RELEASE SOFTWARE (fc3)
Technical Support:
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 28-Apr-10 16:04 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T7, RELEASE SOFTWARE (fc1)
B1F2R220-VoIPATAPre1 uptime is 15 weeks, 3 days, 19 hours, 38 minutes
System returned to ROM by reload at 21:41:18 UTC Thu Aug 21 2014
System restarted at 21:42:41 UTC Thu Aug 21 2014
System image file is "slot0:vg224-i6s-mz.124-22.T5.bin"
Cisco VG224 (R527x) processor (revision 4.1) with 119808K/11264K bytes of memory.
Processor board ID FTX1604AL5Y
R527x CPU at 225MHz, Implementation 40, Rev 3.1
1 On-Board Twenty-Four FXS Analog Voice Module V2.1
2 FastEthernet interfaces
DRAM configuration is 64 bits wide with parity disabled.
63K bytes of non-volatile configuration memory.
System fpga version is 250027
System readonly fpga version is 250027
Option for system fpga is 'system'.
62496K bytes of ATA Slot0 CompactFlash (Read/Write)
Configuration register is 0x2102