VFP8/SP1 - SET STATUS BAR ON/OFF

[milosv]

Hi,
I give up! I was compare installation VFP7 and new VFP8.
I use new VFP8/SP1
I don't see status bar. In command window, when I issue SET STATUS ON,everything is OK. If i issue a command SET STATUS BAR ON or OFF, nothing happens on my screen. (I need line numbers in VFP editor).I set in TOOLS,OPTIONS(WRAP OFF etc..), but everything do fine in VFP7, not in VFP8. I am shure that is my mistake, but where?? Nothing special in Config.fpw.??!?
Please help
Milos

 

[ramani]

Hi

Have you tried this..

First open a editing window with the command..

MODI COMM test

Now with this open..

VFP Menu->Edit->Properties->
Select Sho Line/Col Number
Select Save preferences
and click suitably to save it.

Your line number should be visible now.




____________________________________________
ramani - (Subramanian.G)

http://winnersoft.coolfreepages.com/

When you ask VFP questions, please add VFP version.
Merry Christmas & Happy New Year

 

[milosv]

Ramani,
Sorry, dont't work. Work fine in VFP7 .not. in VFP8
I use following settings:
(tools/options(SHIFT-CLICK)) and my config.fpw:
SET TALK ON
SET NOTIFY ON
SET CLOCK STATUS
&& RecentlyUsedFiles = 10
SET COMPATIBLE OFF
SET PALETTE ON
SET BELL ON
SET BELL TO '', 1
SET SAFETY ON
SET ESCAPE OFF
SET LOGERRORS ON
SET KEYCOMP TO WINDOWS
SET CARRY OFF
SET CONFIRM OFF
SET BROWSEIMECONTROL OFF
SET STRICTDATE TO 1
&& TabOrdering = 0
&& ResWidth = 800
&& ResHeight = 600
&& GridHorz = 12
&& GridVert = 12
&& ScaleUnits = 0
&& FormSetLib =
&& FormSetClass =
&& FormsLib =
&& FormsClass =
SET EXACT OFF
SET NEAR OFF
SET ANSI OFF
SET LOCK OFF
SET EXCLUSIVE OFF
SET MULTILOCKS ON
SET HEADINGS ON
SET DELETED OFF
SET OPTIMIZE ON
SET UNIQUE OFF
SET CPDIALOG ON
SET REFRESH TO 0,5
SET ODOMETER TO 100
SET BLOCKSIZE TO 64
SET REPROCESS TO 0
SET COLLATE TO ""
&& SCCProvider = Microsoft Visual SourceSafe
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\SCCTEXT.PRG" TO _SCCTEXT
&& ProjectHookLib =
&& ProjectHookClass =
&& CrsBuffering = 1
&& CrsMethodUsed = 1
&& CrsWhereClause = 3
&& CrsFetchSize = 100
&& CrsMaxRows = -1
&& CrsNumBatch = 1
&& CrsUseMemoSize = 255
&& SQLDispLogin = 1
&& SQLTransactions = 1
&& SQLConnectTimeOut = 15
&& SQLIdleTimeOut = 0
&& SQLQueryTimeOut = 0
&& SQLWaitTime = 100
&& TMPFILES = c:\docume~1\milos\locals~1\temp
SET PATH TO C:\WINDOWS\SYSTEM32;C:\WINDOWS;C:\WINDOWS\SYSTEM32\WBEM;C:\FOXY2_SAMPLE\MILOS\DATA;DATA;DATA
&& HelpTo = c:\program files\microsoft visual foxpro 8\dv_foxhelp.chm
&& HelpCollection =
SET HELP ON
SET HELP COLLECTION
SET HELP TO "c:\program files\microsoft visual foxpro 8\dv_foxhelp.chm"
&& ResourceTo = c:\documents and settings\milos\application data\microsoft\visual foxpro 8\foxuser.dbf
SET RESOURCE ON
SET RESOURCE TO "c:\documents and settings\milos\application data\microsoft\visual foxpro 8\foxuser.dbf"
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\WIZARD.APP" TO _WIZARD
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\BUILDER.APP" TO _BUILDER
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\CONVERT.APP" TO _CONVERTER
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\GENMENU.FXP" TO _GENMENU
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\BROWSER.APP" TO _BROWSER
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\GALLERY.APP" TO _GALLERY
STORE "" TO _INCLUDE
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\BEAUTIFY.APP" TO _BEAUTIFY
STORE "" TO _GETEXPR
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\GENHTML.PRG" TO _GENHTML
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\TASKPANE.APP" TO _STARTUP
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\SAMPLES\" TO _SAMPLES
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\COVERAGE.APP" TO _COVERAGE
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\TASKLIST.APP" TO _TASKLIST
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\OBJECTBROWSER.APP" TO _OBJECTBROWSER
STORE "C:\DOCUMENTS AND SETTINGS\MILOS\APPLICATION DATA\MICROSOFT\VISUAL FOXPRO 8\FOXCODE.DBF" TO _FOXCODE
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\FOXCODE.APP" TO _CODESENSE
STORE "C:\DOCUMENTS AND SETTINGS\MILOS\APPLICATION DATA\MICROSOFT\VISUAL FOXPRO 8\FOXTASK.DBF" TO _FOXTASK
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\VFPXTAB.PRG" TO _GENXTAB
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\FOXREF.APP" TO _FOXREF
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\TOOLBOX.APP" TO _TOOLBOX
STORE "C:\PROGRAM FILES\MICROSOFT VISUAL FOXPRO 8\TASKPANE.APP" TO _TASKPANE
SET SYSFORMATS ON
SET SECONDS ON
SET CENTURY ON
&& CurrSymbol = SIT
SET CURRENCY RIGHT
SET CURRENCY TO " SIT"
SET HOURS TO 24
SET DATE TO SHORT
SET DECIMALS TO 2
SET FDOW TO 2
SET FWEEK TO 1
SET MARK TO "."
SET SEPARATOR TO ","
SET POINT TO "."
&& DebugEnvironment = 0
SET TRBETWEEN OFF
STORE 0.00 TO _THROTTLE
&& DebugOutputFileName =
&& TraceFontName = Courier New
&& TraceFontSize = 10
&& TraceFontStyle = 0
&& WatchFontName = MS Sans Serif
&& WatchFontSize = 8
&& WatchFontStyle = 0
&& LocalsFontName = MS Sans Serif
&& LocalsFontSize = 8
&& LocalsFontStyle = 0
&& OutputFontName = MS Sans Serif
&& OutputFontSize = 8
&& OutputFontStyle = 0
&& CallstackFontName = MS Sans Serif
&& CallstackFontSize = 8
&& CallstackFontStyle = 0
&& TraceNormalColor = RGB(0,0,0,255,255,255), Auto, Auto
&& TraceExecutingColor = RGB(255,255,0,0,0,0), NoAuto, Auto
&& TraceCallstackColor = RGB(0,0,0,236,233,216), Auto, Auto
&& TraceBreakpointColor = RGB(255,0,0,0,0,0), NoAuto, Auto
&& TraceSelectedColor = RGB(255,255,255,0,0,0), Auto, Auto
&& WatchNormalColor = RGB(0,0,0,255,255,255), Auto, Auto
&& WatchSelectedColor = RGB(255,255,255,0,0,0), Auto, Auto
&& WatchChangedColor = RGB(255,0,0,255,255,255), NoAuto, Auto
&& LocalsNormalColor = RGB(0,0,0,255,255,255), Auto, Auto
&& LocalsSelectedColor = RGB(255,255,255,0,0,0), Auto, Auto
&& OutputNormalColor = RGB(0,0,0,255,255,255), Auto, Auto
&& OutputSelectedColor = RGB(255,255,255,0,0,0), Auto, Auto
&& CallstackNormalColor = RGB(0,0,0,255,255,255), Auto, Auto
&& CallstackSelectedColor = RGB(255,255,255,0,0,0), Auto, Auto
&& BookmarkColor = RGB(0,255,255,0,0,0), NoAuto, Auto
&& ShortcutColor = RGB(0,0,255,0,0,0), NoAuto, Auto
&& EditorCommentString = *!*
&& DisplayCount = 15
&& ParensHighlightDuration = 1500
&& RptGridHorz = 12
&& RptGridVert = 12
&& RptScaleUnits = 1
&& RptFont = Courier New, 10, N

and here is my config.fpw:

_SCREEN.Icon = "MySmile.ICO"
TITLE=Miloš Vukomanovic - RAZVOJNO OKOLJE VFP 8.0
COMMAND=ON SHUTDOWN DO C:\VFP_setup\REALQUIT
COLLATE = "Czech"
CODEPAGE = 1250
SYSFORMAT = ON

Maybe must I reinstall all!!!
Thanks nevertheless.
Milos

 

[ramani]

Hi Milosv,

The graphical environment is having some issues.

For testing, just do this..

In the command window, issue the command..
_SCREEN.Themes = .f.

And see if this helps you.



____________________________________________
ramani - (Subramanian.G)

http://winnersoft.coolfreepages.com/

When you ask VFP questions, please add VFP version.
Merry Christmas & Happy New Year

 

[milosv]

Hi Ramani,
I very appreciate your help (more times) but in this case
_SCREEN.Themes = .f. or .t. doesn't change anything.

SET STATUS ON/OFF WORKING FINE (with nice blue status bar), but SET STATUS BAR doesn't. I don't see status line with NUM LOCK etc...
I wasted your time, but I wait a little more before reinstall all.
Milos

 

[milosv]

Hi, hi, hi to all
I'm solve the problem !?!
I use WIN XP and when I unlock and hide WIN XP status line, VFP status bar come visible. I don't now how, but now all things is OK.
Now, because I am beginner in VFP, I can continue with research and post another stupid question! Just a little shame.
By the way, _SCREEN.Themes = .f. helps me a lot, because I am learning VFP from older VFP samples.
Thanks,
Kind regards
Milos