Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Veritas not working

Status
Not open for further replies.

kidem

MIS
Feb 17, 2004
44
US
Ok...here is it guys, veritas 9 backup for windows server going on 2000 on a dell 2600 poweredge. Now i install veritas, use veritas drivers but it dont see the drive after the install, so i uninstall it from device manager ,NOW it see's the drive, But its not working right. Any iodeas or compatiblity issues you all know about. Also ARCserve was used before. And im having this at another clients site with same setup.

Any ideas are welcome thanks
 
After you installed the Veritas drivers did you reboot??
 
Yes i did, its happening at two diferent locations, but to different tape drives.
 
Are you installing it on the device with the tape drive?

-SQLBill
 
PowerVault 100T , and yes it on the same machine. this is wierd it will work for one dya then stop and never work again. We can do a ntbackup fine too
 
Is the 100T an autolibrary?

Are there any error messages in the Windows Event Viewer logs?

In BE, the Active Job tab...are the jobs failing? Anything in the Job History?

-SQLBill
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top