Dec 10, 2014 #1 jcosgrove Vendor Joined Feb 10, 2004 Messages 163 Location US What is the minimum software version for these newer V2 VCM cards to work on an IP500v2 chassis?
Dec 10, 2014 #2 tlpeter Programmer Joined Dec 5, 2005 Messages 27,844 Location NL 8.1 something so i would upgrade to the latest 8.1 or 9.0 release to be sure. BAZINGA! I'm not insane, my mother had me tested! Upvote 0 Downvote
8.1 something so i would upgrade to the latest 8.1 or 9.0 release to be sure. BAZINGA! I'm not insane, my mother had me tested!
Dec 10, 2014 #3 WellingtonPaez Technical User Joined May 29, 2012 Messages 28 Location US Daughter cards normally will get updated by the SD card automatically by your IPO, when using it as the HTTP/TFTP Server. Upvote 0 Downvote
Daughter cards normally will get updated by the SD card automatically by your IPO, when using it as the HTTP/TFTP Server.
Dec 10, 2014 #4 Gunnaro Vendor Joined Aug 27, 2010 Messages 4,755 Location NO The last R8.0 should take it as well. Kind regards Gunnar ______________________________________ Mille viae ducunt homines per saecula Romam Upvote 0 Downvote
The last R8.0 should take it as well. Kind regards Gunnar ______________________________________ Mille viae ducunt homines per saecula Romam
Dec 10, 2014 #5 intrigrant Systems Engineer Joined Jun 21, 2004 Messages 11,626 Location CA A VCM32v2 in version 7 will show up as a VCM64 with 24 free Avaya IP endpoint license. Not sure if the card actaully works.... Upvote 0 Downvote
A VCM32v2 in version 7 will show up as a VCM64 with 24 free Avaya IP endpoint license. Not sure if the card actaully works....