Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using IPO SIP

Status
Not open for further replies.

dymip

Technical User
Oct 3, 2008
4
CO
Hope to find here the sip solution we've looking for from long ago.
Facts:
This sip line is registered into an xlite softphone and its working right.
After checking many times the document Example SIP configurations for Release 4 by Mr IPO by our great poster MRIPO, and Checking my log
I found some unusual lines.
Quoting page 21 (the second ITSP example)
This LINES do never appear on my log.
2457742mS SipDebugInfo: SIPTrunks: active channels 0 overall number 10
this line is not present

788254mS SipDebugInfo: MZ extension is dialing 0296677152@byo.engin.com.au
instead of this I get
411808326mS SipDebugInfo: extension is dialing 0018007902029@64.94.36.152
note the lack of "MZ"

4166922mS SipDebugInfo: MZ: INVITE SENT TO 125.254.25.2 5060
instead of this I get
411808337mS SipDebugInfo: TxInvite: INVITE SENT TO 62.94.36.138 5060

4166923mS SipDebugInfo: MZ: Entered Sip_sendToNetwork packet destination is 125.254.25.2
instead of this I get
411808340mS SipDebugInfo: Sip_sendToNetwork packet of length 821

4166923mS SipDebugInfo: MZ SIPTrunk SendToTarget 7dfe1902, 5060
This line is not present

411808340mS SipDebugInfo: SIPTrunk SendToTarget 3e5e248a, 5060
From: Extn210 <sip:Extn210@soulaustralia.com.au>;tag=160a19c954b9aeb9
instead of this I get
From: 18007081111 <sip:18007081111@voip.telme.sg>;tag=932c83d3764a24b5



THIS LINES do appear on my log and DO NOT appear on the document
411808326mS SipDebugInfo: CMSetup receive, ep ffcb6b20, dialog ffcf4f50

411808328mS SipDebugInfo: Registration Required is 1, Primary Status 0, Secondary Status 0

411809131mS SIP Trunk: 10:Rx
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP
In the document the log shows: trying and ringing but never "not authorized"

The system description is:
IPO SOE 4T 8A
Release 4.0 (14)
SIP channels 1 (its active)
ITSP voip.telme.sg
sip line id 10
Codec G729A

notice: this IPO is working as a gateway for Internet acces, LAN1 port is plugged to our LAN, and LAN2 si plugged to the ADSL modem (une.com.co) so we can assure the IPO is accesing internet.
system monitor has enabled all the SIP checkboxes
We think that I could be an error when sending the digits.
HERE IT'S THE LOG.

411808302mS CMARS: CMARSHandler::FindActiveARSByGroupID GroupID=249
411808303mS SipDebugInfo: SIPTrunks: Make Target voip, line group id is 249 and ip of 3e5e248a
411808304mS CMMap: a=3.1 b=0.0 Mapper::AllocateCodec allocated CMRTVocoder resource busy 1, total 3
411808305mS SipDebugInfo: License, Valid 1, Available 1, Consumed 0
411808326mS SipDebugInfo: extension is dialing 0018007902029@64.94.36.152
411808326mS SipDebugInfo: CMSetup receive, ep ffcb6b20, dialog ffcf4f50
411808327mS SipDebugInfo: MZ extension is dialing 0018007902029@64.94.36.152
411808327mS SipDebugInfo: *********************************************************
411808328mS SipDebugInfo: INVITE (method) SENT TO 62.94.36.138 5060
411808328mS SipDebugInfo: Registration Required is 1, Primary Status 0, Secondary Status 0
411808328mS SipDebugInfo: *********************************************************
411808337mS SipDebugInfo: *********************************************************
411808337mS SipDebugInfo: TxInvite: INVITE SENT TO 62.94.36.138 5060
411808338mS SipDebugInfo: *********************************************************
411808338mS SipDebugInfo: Sending INVITE, ep ffcb6b20, dialog ffcf4f50
411808340mS SipDebugInfo: Sip_sendToNetwork packet of length 821
411808340mS SipDebugInfo: SIPTrunk SendToTarget 3e5e248a, 5060
411808341mS SIP Trunk: 10:Tx
INVITE sip:0018007902029@64.94.36.152 SIP/2.0
Via: SIP/2.0/UDP 202.233.114.87:5060;rport;branch=z9hG4bK4526c0fd63e29de97c660c9ceff338ea
From: 18007081111 <sip:18007081111@voip.telme.sg>;tag=932c83d3764a24b5
To: <sip:0018007902029@64.94.36.152>
Call-ID: 839832baf42752ce699549f6d57b9092@202.233.114.87
CSeq: 611619632 INVITE
Contact: 18007081111 <sip:18007081111@202.233.114.87:5060;transport=udp>
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE
Content-Type: application/sdp
Content-Length: 305

v=0
o=UserA 3508398016 1663733971 IN IP4 202.233.114.87
s=Session SDP
c=IN IP4 202.233.114.87
t=0 0
m=audio 49152 RTP/AVP 18 4 8 0 101
a=rtpmap:18 G729/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=fmtp:18 annexb = no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
411808341mS SIP Tx: UDP 192.168.254.1:5060 -> 62.94.36.138:5060
INVITE sip:0018007902029@64.94.36.152 SIP/2.0
Via: SIP/2.0/UDP 202.233.114.87:5060;rport;branch=z9hG4bK4526c0fd63e29de97c660c9ceff338ea
From: 18007081111 <sip:18007081111@voip.telme.sg>;tag=932c83d3764a24b5
To: <sip:0018007902029@64.94.36.152>
Call-ID: 839832baf42752ce699549f6d57b9092@202.233.114.87
CSeq: 611619632 INVITE
Contact: 18007081111 <sip:18007081111@202.233.114.87:5060;transport=udp>
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE
Content-Type: application/sdp
Content-Length: 305

v=0
o=UserA 3508398016 1663733971 IN IP4 202.233.114.87
s=Session SDP
c=IN IP4 202.233.114.87
t=0 0
m=audio 49152 RTP/AVP 18 4 8 0 101
a=rtpmap:18 G729/8000
a=rtpmap:4 G723/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=fmtp:18 annexb = no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
411808343mS SipDebugInfo: initialising mTxnContext
411808345mS SipDebugInfo: *********************************************************
411808346mS SipDebugInfo: State Transtion form Old State 0 to New state 1
411808346mS SipDebugInfo: *********************************************************
411808347mS SipDebugInfo: SIPDialog::UpdateSDPState has just transitioned to state 1
411808361mS CD: CALL: 0.1738.0 BState=Idle Cut=1 Music=0.0 Aend="GERENCIA(202)" (0.10) Bend="" [Line 10] (0.0) CalledNum=0018007902029 () CallingNum=202 (GERENCIA) Internal=0 Time=10854 AState=Dialled
411809131mS SIP Rx: UDP 62.94.36.138:5060 -> 192.168.254.1:5060
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 202.233.114.87:5060;rport=60524;branch=z9hG4bK4526c0fd63e29de97c660c9ceff338ea
To: <sip:0018007902029@64.94.36.152>
From: 18007081111 <sip:18007081111@voip.telme.sg>;tag=932c83d3764a24b5
Call-ID: 839832baf42752ce699549f6d57b9092@192.168.254.1
CSeq: 611619632 INVITE
Max-Forwards: 70
Digest realm="62.94.36.138",nonce="2121778393",stale=FALSE,algorithm=MD5
Content-Length: 0

411809131mS SIP Trunk: 10:Rx
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 202.233.114.87:5060;rport=60524;branch=z9hG4bK4526c0fd63e29de97c660c9ceff338ea
To: <sip:0018007902029@64.94.36.152>
From: 18007081111 <sip:18007081111@voip.telme.sg>;tag=932c83d3764a24b5
Call-ID: 839832baf42752ce699549f6d57b9092@192.168.254.1
CSeq: 611619632 INVITE
Max-Forwards: 70
Digest realm="62.94.36.138",nonce="2121778393",stale=FALSE,algorithm=MD5
Content-Length: 0

411809132mS SipDebugInfo: MZ SIPDialog: ReceiveFromTarget
411809138mS PRN: MZ stubs sip_cbk_fetchTxn no element found
411809138mS SipDebugInfo: MZ SIPDialog TXN : Decoding of message Succeded 2
411809139mS SipDebugInfo: SIP: ProcessInbound Message
411809139mS SipDebugInfo: SipTrunks: Cannot free Txn Key 2015
411810197mS SIP Rx: UDP 62.94.36.138:5060 -> 192.168.254.1:5060
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 202.233.114.87:5060;rport=60524;branch=z9hG4bK4526c0fd63e29de97c660c9ceff338ea
To: <sip:0018007902029@64.94.36.152>
From: 18007081111 <sip:18007081111@voip.telme.sg>;tag=932c83d3764a24b5
Call-ID: 839832baf42752ce699549f6d57b9092@192.168.254.1
CSeq: 611619632 INVITE
Max-Forwards: 70
Digest realm="62.94.36.138",nonce="2121778393",stale=FALSE,algorithm=MD5
Content-Length: 0
 
I have the SoE 4T 8A with 4.0 (14)

After checking the bulletin 97.
I've been trying to perform the upgrade to 4.2 (4) but both validated and offline upgrades processes failed from the very moment.


Some one has gotten it to work? 4.2 on SoE 4T 8A
 
well by now things are working fine
it was just matter of retrying.

was a lot slow but effective.

now I am on 4.2 (4) hope SIP do work now.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top