Anyone ever user one of these little FaxFinder devices on an IPOffice. The brochure says it can be used with PBX's the support DID to DTMF analog which I think works with more sophisticated fax servers.
Thanks
Jim
Thanks
Jim
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Using FaxFinder by MultiTech 1
- Thread starter jml2665
- Start date
-
1
- #2
Yeah I've installed 3, they work great and are pretty easy to setup. Multitech actually wrote a document that details step-by-step how to configure the IPO to work with the FaxFinders (FF100 and FF200 are the best for use with PRI/T1). If you can't find it on their website, let me know and I can get you a copy.
CZ
CZ
- Thread starter
- #3
Thanks CZ, I saw your document on your website, same one Multitech sent me today, along with the announcement on a 4 and 8 port version of the FaxFinder. I was told it would be out very soon, within a couple weeks.
When you say the FF100 and FF200 are best with a PRI/T1, do you mean through the IPO? as I read the documents the FaxFinder connects via analog using DTMFF not a direct PRI/T1 to the FaxFinder??
When you say the FF100 and FF200 are best with a PRI/T1, do you mean through the IPO? as I read the documents the FaxFinder connects via analog using DTMFF not a direct PRI/T1 to the FaxFinder??
correct jml through the IPO... 1 or 2 ports(and soon 4/8 ports - great!), via analog with DTMFF. I've always set them up with DID's over PRI. Follow that document to the "T" and you should be A-OK.
CZ
CZ
- Status