AccessXP
IS-IT--Management
- Jan 29, 2002
- 132
Is there a tool that makes working with a cisco 2600 router simple?
example... interface like a lynksys router or dlink.
example... interface like a lynksys router or dlink.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
User Interface
- Thread starter AccessXP
- Start date
- Status
Ah...like Linksys? No! With a GUI? Yes. Several things in the market today have a GUI with Cisco routers. Cisco Works 2000 for example has a GUI interface with "Cisco View". But if you want something simple for a layman to set up and install....like a Linksys, then your out of luck.
"I can picture a world without war. A world without hate. A world without fear. And I can picture us attacking that world, because they'd never expect it."
- Jack Handey, Deep Thoughts
"I can picture a world without war. A world without hate. A world without fear. And I can picture us attacking that world, because they'd never expect it."
- Jack Handey, Deep Thoughts
- Thread starter
- #3
experimenter
ISP
AccessXP,
Cisco IOS has a limited built-in web based interface, also some utilities like ConfigMaker and CiscoWorks; But IPKONFIG is rather right. You need good knowledge to configure a Cisco box correctly and you will find Cisco command prompt the best tools, after that its reliablility lets you be kinda layman.
Experimenter
Cisco IOS has a limited built-in web based interface, also some utilities like ConfigMaker and CiscoWorks; But IPKONFIG is rather right. You need good knowledge to configure a Cisco box correctly and you will find Cisco command prompt the best tools, after that its reliablility lets you be kinda layman.
Experimenter
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question