Use cl amw all command from ASA?

[joeOctel]

Is there a way to use the "clear amw all" command from ASA for a range of stations? I have an S8700 and I am using ASA. I need to clear out the message lights for about 200 stations. I don't have modem access. Can I use ASA or some other way to clear the message lights?

 

[1a22ip]

Yes you can I use the terminal emulation and type clear amw all ext

1a2 to ip I seen it all

 

[joeOctel]

Is it possible to setup a script to do this with the terminal emulation or do I need to type each one in manually?

 

[1a22ip]

You have to type the extension I don't think a script will work. You can clear AMW's via your telephone set. Put a cover Msg Ret button a next button and a Delete MSg button on your set. On the system parameters form find the setting Stations with System-wide Retrieval Permission (enter extension) and enter your extension. User calls with a light thats stuck. Press Cov msg Ret enter the extension press next then delete msg. Light goes off.

Hope this helps
ED

1a2 to ip I seen it all

 

[joeOctel]

Thanks for the information.