USB boot-up issue

[scooter1966]

When I boot up my system, I get the message "USB device over current detected!!!" Please remove over-current USB device!!! Then it shuts down. Any help would be appreciated.

M2NPV-VM motherboard
AMD Athlon 64 3800+
Corsair DDR2 1024MB

 

[franklin97355]

Have you removed all USB devices?

The answer is "42"

 

[scooter1966]

Yes. There are no external USB deviced attached and I removed any internal connections to the front USB ports.

 

[automatic2]

Because the USB spec calls for a max current draw from any one device, a sense device is utilized to indicate an over draw condition. You'll either have a shorted power bus, or the sensing device is kaput.