Just in case you messed it up already:
Here's the procedure for upgrading the prompts:
Put card in Laptop
Remove all Gxxxx files in ENG & ENU folder
Put card back in IP500
Downgrade IP500 to 4.2
Run upgrade 5p batch file in LVM folder
Upgrade to 5.0
NoUser, go to source number and add vmail_wait_duration=2000, this adds 2 seconds of time before the VM cuts through to record.
The last item might be needed anyway but is needed for sure in this case.
Kyle Holladay
ACA-I, ACA Call Center, ACS-I, ACS-M, TIA-CTP, MCP/MCTS Exchange 2007
ACE Implement: IP Office
"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford