Upgrading a Partner Basic Edition from version 7.0 (278401) 1

[joe2938]

I have to upgrade a partner basic edition to version 9.1, have the 9.1 upgrade license installed, my question is do I bring this to a version 8.1 1st before I go to version 9.1? If so what version of 8.1 should I upgrade to? I have searched but can not find any docs on this, upgrading from current version of 7.0. Any help would be appreciated!

 

[joe2938]

Also this has a PCS 11 box

 

[janni78]

Have you tried looking in the Release Notes for the version you wanna go to?

It pretty clearly states which steps are needed, especially if the IP500 v2 unit is PCS14 or lower.

"Trying is the first step to failure..." - Homer

 

[joe2938]

Having a hard time finding the release notes, sorry. Can you point me in the right direction

 

[janni78]

It's on the same page as where you find the software.

Avaya Support Download IP Office 9.1.7

"Trying is the first step to failure..." - Homer

 

[joe2938]

Thanks Janni, read this already but does not mention partner basic edition, Yes I hate basic but customer is insisting on running it so does this upgrade procedure apply as well to partner basic edition and thanks for your help

 

[janni78]

If would assume that unless otherwise stated the same applies to Partner edition (and Basic).

Considering you're on 7.0 and have PCS11 you first go to 8.1(65) or higher 8.1 and then 9.1.

"Trying is the first step to failure..." - Homer

 

[joe2938]

Awesome thanks for all of your help