Upgrade bc10 to bc12

[jaylek]

Hai,
What all steps to be taken care while doing an from bc10 to bc12? Can any the steps/tools required to do so.
Thanks in advance.

LICENCE TAG ALLOWED USED
ANALOGUE-EXTENSION 16 15
BASE-STATION-DECT 12 12
CORDLESS-EXTENSION 30 27
DIGITAL-EXTENSION 301 268
DISA-NUMBER 1 0
DUPLICATED-CS 1 1
EXTERNAL-LINE-CAS-ANA 80 67
LICENSE-FILE 1 0
OM-ETH-INTERFACE 1 0
OPERATOR-EXTENSION 3 2
SMDR-V24-INTERFACE 1 1
VM-V24-INTERFACE 1 1
VOICE-MAILBOX 300 0
VOICE-PORT 16 0
VOICE-SYSTEM 1 0

 

[VMPOP]

hello
1st of all you need to RUN USS software to know which PROMS and which borads shall be swapped.
and backup your EX data using PCREGEN which comes with WINFIOL.
then after you replace all your hardware you need a clean BC12 INL on NIU2 FlashDisk.
Power up your system and wait till you read 101 on LPU5 display.
connect to MD110 via MML port 1 in NIU2 to NIUX mode (TTY mode and press and hold ssssssss then ; and press enter to login) to write down the Lisence file,
discconect and connect again to MD110 normally
send your lisence file, load it to the required path( see ALEX - Lisence loading - for Commands)
after you need to send LIM DISP (LIM Disposition Table)
for the configuration you have there are a unique file.
when finished send SFEXI; command and don't forget to dump after.
that's it, you can begain to program your EX data.


East Or West Google Is The Best

 

[jaylek]

Thanks for your reply.
Sorry to ask, Can u brief USS ??

 

[VMPOP]

hello
USS is the [Upgrade Support System] used by Ericsson to identify the Boards that has to be changed or upgraded in your system, i don't know where you can find it on the web, but i guess a nearby local reseller of /// can help you get it.
cheers

East Or West Google Is The Best