Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Unnable to control remote machine with VNC
- Thread starter dmaytum
- Start date
It is possible that the machine you are viewing is set to ignore inputs or maybe you're connecting through a view only password... Either one would make sense based on what you're saying.
If you have physical access to the machine, be sure it's not set for view only mode, and be sure your password is the one that is for the interactive mode.
If you have physical access to the machine, be sure it's not set for view only mode, and be sure your password is the one that is for the interactive mode.
- Status
Similar threads
- Locked
- Question