Unity Connection SIP Integrated with CUCM 7.0 MWI Not Working

[redvoz77]

I have integrated my Unity Connection server (statnd alone) with my CUCM 7.0 (using a SIP Trunk) and I can not get my MWI to work. I am using SCCP 7900 series phones. Any thoughts?

 

[pndscm]

Why did you use a SIP trunk? I integrated a similar system together and never used a trunk, just standard voice mail ports.

 

[cblack21]

Go here, check the SIP security settings in table 5.1 specifically the check boxes.

http://www.cisco.com/en/US/docs/voi...tegration/cucm_sip/guide/cucintcucmsippdf.pdf

 

[redvoz77]

pndscm - I used a SIP trunk because I wanted to utilize the new technology.

cblack21 - Thank you the document was great. I reset my services in CUCM/Unity and the MWI lights came on.