Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unified Messaging configuration problem 1

Status
Not open for further replies.
gutwrench

gutwrench

Vendor
Feb 7, 2005
64
US
Hello again,

Twice in one day....

I changed the IP address on a Call Pilot 150. At the end of all of the boot info, after "Voice Mail Core ready!", I get, "WARNING: osSetCurrentDrive is not implemented" displayed. Also, when opening Outlook, I get "Unable to access system resources on the server".

So, here's the question, are these messages related and if so, how do I get the "osSetCurrentDrive" implemented. If not, what the heck am I missing? Usually, I am successful installing Unified messaging by defining the IP address on the network and running the setup.exe in the Call Pilot disk. No sweat. This time, no such fortune.

Any suggestions? Thanks for reading.

Scott K.

 
Status
Not open for further replies.

Similar threads

Houdini9881
  • Locked
  • Question
BCM50 Configurations
Replies
3
Views
443
exsmogger
exsmogger
It wire techs
  • Locked
  • Question
Print the configuration of the Nortel MICS
Replies
1
Views
237
curlycord
curlycord
Arr
  • Locked
  • Question
CICS External Call Forward problem
Replies
10
Views
469
Arr
Arr
MooreTel
  • Locked
  • Question
Problem with "Company Greeting" on CP100
Replies
1
Views
210
curlycord
curlycord
Robert Lafleur
  • Locked
  • Question
Replacing CICS with DN lenght of 2 by MICS with DN lenght of 3 causing problems with CallPilot100
Replies
2
Views
211
Robert Lafleur
Robert Lafleur

Part and Inventory Search

Sponsor

Back
Top