Unassigned DDI/DID numbers

[gringotektips]

Hi Guys,
We have a S8300 V5. We have an ISDN line with 100 DDI /DID numbers. At present we only have 25 users. We also have an attendant.
If we call a DDI / DID that has no user assigned, the call will go to the attendand. Is there any way of easily pointing non assigned numbers to a VDN or station so that we can play a message etc?

Thanks in advance.

 

[AvayaTier3]

Here is where that is changed

change system-parameters features                              Page   1 of  19
                            FEATURE-RELATED SYSTEM PARAMETERS

DID/Tie/ISDN Intercept Treatment: attd

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[AvayaTier3]

You could also use UDP "uniform dial plan" for assigning and routing numbers or blocks of numbers.
This is used in conjunction with AAR analysis. You can route calls to any switch on your network of switches using route patterns to trunk-groups.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[mikeydidit]

On the screen shot that Brett gave you,

FEATURE-RELATED SYSTEM PARAMETERS

You could record an announcement and put that extension in the DID/Tie/ISDN Intercept Treatment:XXXX

You will need an announcement pack in your system for this.

"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953

For the best response to a question, read faq690-6594

 

[gringotektips]

Thsnk you guys.

A great help as usual!