Unable tp submit a job due to unaviable group

[mohamdr]

I am using HP MSL6030 with 2 drives,both drives are assigned.
I am also purchased a Tape Library option license to support 2 drives.

when I run 2 job the first job get executed, but the second
job giving Unable tp submit a job due to unaviable group

why it doesn't use the second drive ?

I think I have to create another group and assign the second drive to it ? please help how to do it ?

do I have to reconfigure it from Device configuration

regards,
mohamdr

 

[davidmichel]

when two stand alone tape drives are setup in the same group they are used for spanning. When you want to run a job to each drive at the same time it is necessary to set up a second group for the other drive.

 

[mohamdr]

Hi,
Thanks for your reply.

These 2 drives on 1 library ... how to put each drive in a seprate group.

regards

 

[mohamdr]

I have create another group and assigned the second drive to it and problem get resolved.

 

[mohamdr]

I have create another group and assigned the second drive to it and problem get resolved.