Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unable to deliver the message due to a communications failure

Status
Not open for further replies.

KimVong

IS-IT--Management
Joined
Sep 13, 2002
Messages
90
Location
US
I can't e-mail out to a couple of domain.
this is the error message

Your message did not reach some or all of the intended recipients.

Subject:
Sent: 10/2/2002 9:26 AM

The following recipient(s) could not be reached:

'Tariv@mindspring.com' on 10/2/2002 9:26 AM
Unable to deliver the message due to a communications failure
The MTS-ID of the original message is: c=US;a= ;p=Coast Oil Compan;l=COCMAIL-021002162620Z-895


I do have reverse DNS, and I can e-mail to all other domain except for this.
My exchange server 5.5 use to be open relay, and I have remove our ip address from most of the black list.
can someone tell me how to solve this problem?

thanks

KV
 
probably it's not a problem on your end. Daren J. Lahey
Just another computer guy...
 
Try telnetting to these servers (you will find most won't allow a connection) on port 25 and then try and send mail.


mindspring.com MX preference = 5, mail exchanger = mx10.mindspring.com
mindspring.com MX preference = 5, mail exchanger = mx11.mindspring.com
mindspring.com MX preference = 5, mail exchanger = mx12.mindspring.com
mindspring.com MX preference = 5, mail exchanger = mx00.mindspring.com
mindspring.com MX preference = 5, mail exchanger = mx01.mindspring.com
mindspring.com MX preference = 5, mail exchanger = mx02.mindspring.com
mindspring.com MX preference = 5, mail exchanger = mx03.mindspring.com
mindspring.com MX preference = 5, mail exchanger = mx04.mindspring.com
mindspring.com MX preference = 5, mail exchanger = mx05.mindspring.com
mindspring.com MX preference = 5, mail exchanger = mx06.mindspring.com
mindspring.com MX preference = 5, mail exchanger = mx07.mindspring.com
mindspring.com MX preference = 5, mail exchanger = mx08.mindspring.com
mindspring.com MX preference = 5, mail exchanger = mx09.mindspring.com

HTH

Ash.
 
Typically this kind of situation occours when you have been added to a blackhole list and some domains do a manual import of the blackhole list..

it could be that your "blacklisting" has not yet been removed from some sites..

What I do in such situations is to email from other domains (hotmail etc) to the site admin requesting him to remove my domain or to update his blackhole listing..

Rgds

Siraj
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top