Guys, we are currently trying to integrate our CS1K into UM using Geomant to provide MWI on our phones, however we are having no end of issues, but one of the things that has come about since the start of the integration is that we are getting the following error on the CS1K ERR4080 FAIL Q+P 1508, where 1508 is an auto attendant for UM. Has anyone seen this error before?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
UM and Geomant MWI to CS1K Integration
- Thread starter chrisay59
- Start date
We set up the free version of UM MWI.
Took half day to set up. Its called freemwi can be found at
Works over SIP trunk and NRS as an endpoint.
Took half day to set up. Its called freemwi can be found at
Works over SIP trunk and NRS as an endpoint.
- Thread starter
- #3
Update, problem sorted, Geomant require some specific Rel 6 patches to work in regards to virtual trunks, although I had patched the system, they were not in service, so put into service and Bobs Your Uncle, it works.....school boy error Doh!
- Status
Similar threads
- Locked
- Question
- Locked
- Question
