Hi there Cisco Pros
I recently acquired a 2621XM and a 2950T-24. I would like to assign different private ip ranges (10.3.1.0 and 10.3.2.0) to two different VLANs by using the Cisco IOS router DHCP server.
Is there a way to configure the router-switch pair to assign each vlan its own pool of addresses?
(1st VLAN to take addresses from 10.3.1.0
2nd VLAN to take addresses from 10.3.2.0)
I recently acquired a 2621XM and a 2950T-24. I would like to assign different private ip ranges (10.3.1.0 and 10.3.2.0) to two different VLANs by using the Cisco IOS router DHCP server.
Is there a way to configure the router-switch pair to assign each vlan its own pool of addresses?
(1st VLAN to take addresses from 10.3.1.0
2nd VLAN to take addresses from 10.3.2.0)
