Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Twinning not working with a carrier code

Status
Not open for further replies.

Larry200

Vendor
Joined
Mar 14, 2011
Messages
4
Location
US
Make call manually 91 802-422-3261 (Ski report for testing) recording comes on ….Please enter your authorization code…021114
3 PRI with a long distance pick for AT&T
Set up Twinning on phone using below …and in all different combinations with no luck.
Can trace the call and see it going out and sending the digits but call goes to VM after 9 rings.
Y - Wait for Call Progress Message 918024223261Y021114
Wait for a Call Progress or Call Proceeding message before sending any following digits as DTMF. For example, the Y character would be necessary at a site where they have signed up with their telephone service provider to withhold international dialing until a DTMF pin/account number is entered that initiates the call progress/proceeding message.

D - Wait for Connect 918024223261D021114
Wait for a connect message before sending any following digits as DTMF.

, - One Second Pause 918024223261,,,,,021114
Add a one second pause in DTMF dialing.
 
It was always my belief that those codes where not valid when dialing out over a PRI.
Codes meaning , D Y
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top