Trtunk to trunk transfer

[wpski]

How could I program incoming calls to be routed over a tie line using trunk to trunk transfer

 

[Bartimaeus]

I'm wondering if you can specify an extension number on the trunk group's "incoming destination" field and have that number be UDP'd to the AAR Analysis table that picks a route pattern where you insert the tie line access code and digits to reach the far end.

Bart

 

[BuckWeet]

Sounds exactly how you'd do it, if there weren't any digits coming in from the trunk in the first place...


BuckWeet

 

[wpski]

I dont hjave UDP oin my system so I am looking for options.

 

[BuckWeet]

I don't think its possible if you don't have UDP (at least easily) Depending on the number of calls that you need to forward over to it, you could make a station, and do a remote coverage for it possibly.. then you'd have to setup the ARS tables to route that call out the tie trunk..


I'd just see about getting UDP turned on..

BuckWeet