Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

tried to partition and . . . . .

Status
Not open for further replies.

onlymel

IS-IT--Management
Mar 9, 2003
142
GB
Hi. - - I was asked to partition a friend’s hard drive. I did everything necessary to create a primary dos partition at 85% and the extended partition of 15%.

Reformatted both drives (C and D). – Then rebooted. At the “A” prompt I typed E: and hit enter. Got the “E” prompt okay and then inserted Windows 98 SE into CD drive.

Still at the “E” prompt I typed “setup” and it went through checking the drives. It showed that drives “C” “D” and “E” had no errors. Now press enter. Did this and then message came up with the following:

MESSAGE SU0013
If you have HPFS or NTFS you must create a MS dos partition. If you have Superstar compression the disable it before running setup.

HELP - HELP - where do I go from here??

Mel in the UK
 
Same thing I stated in the other forum that you posted this question on.

When you did the fdisk, did you activate the partition?
 
Yep - I recall setting each partition as active. I did this in turn. Example the 85% one then the 15% one.

Mel in the UK
 
Hi onlymel;
I think maybe your question is answered in your other forum post....
thread751-737589 please don't cross-post, it makes for total confusion

TT4U

Notification:
These are just "my" thoughts....and should be carefully measured against other opinions.
Backup All Important Data/Docs..All involved shall be spared the grief.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top