Has anyone experienced weird transfer issues after an upgrade. My system was upgraded to cm5.2 from 3.1 and are sporadically having weird transfer issues where you cannot complete transfers that work regularly. It then will start working and then stop a bit later.. just weird.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Transfer Issues
- Thread starter btrain08
- Start date
We recently had a problem after upgrading to CM5 where you couldn't transfer a call back to the original station after it went to coverage. Is this the same sort of issue you are having?
If so I found this option fixed the problem:
change system-parameters coverage-forwarding
maintain SBA at principal: n
(this option is set to Y as default I believe)
If so I found this option fixed the problem:
change system-parameters coverage-forwarding
maintain SBA at principal: n
(this option is set to Y as default I believe)
- Status
Similar threads
- Locked
- Question
- Locked
- Question