Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Transfer a call

Status
Not open for further replies.
donavasq

donavasq

Vendor
Joined
Mar 6, 2007
Messages
72
Location
DO
Hi Everyone,

I would like to know how can I transfer a call from an analog station on the BCM.

Thank you.
 
Sort by date Sort by votes

By pressing "Link" or "Flash" on your analog phone followed by *70 then the extension number
 
Upvote 0 Downvote
If you are in the UK and using BCM v3 the Link / Flash key will not work on un patched systems

If its not broke tweak it..
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

dellphone
  • Locked
  • Question Question
Delayed incoming call
Replies
4
Views
1K
curlycord
curlycord
AShammah
  • Locked
  • Question Question
BCM50 Voip.ms sip trunk & call route setup
Replies
10
Views
873
AShammah
AShammah
jorge99
  • Locked
  • Question Question
BCM50 Transfer on busy
Replies
2
Views
343
jorge99
jorge99
Tele-tech
  • Locked
  • Question Question
BCM50 - Client Wants to dial 0 in users mailbox, call other extension, and end up in that mbox
Replies
5
Views
659
curlycord
curlycord
AShammah
  • Locked
  • Question Question
BCM call pilot sending calls straight to General Delivery mailbox
Replies
5
Views
564
curlycord
curlycord

Part and Inventory Search

Sponsor

Back
Top