Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TRAFFIC STUDY ON PRI TRUNKS 1

Status
Not open for further replies.

Ydel

Technical User
Oct 2, 2006
20
CA
Can anyone tell me if it’s possible to do a traffic study on 2 PRI spans. In LD 2 should I set a report for trunks. Would that capture PRI information. THANKS
 
YES, PRI's are Trunks for traffic purpose's




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
It counts each Channel as a Trunk.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Thanks for you responce. I will give it a try today.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top