Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tracker Commands

Status
Not open for further replies.

scottyjohn

Technical User
Joined
Nov 5, 2001
Messages
523
Location
GB
Hi all,
I forget what the command is to change between ports on the tracker? Any help? John
 
Use the command

;SPx

Where x is the port number
(Eg at the ;1> prompt type ;SP2 to switch to port 2 on the tracker)

Hope this info is of use.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top