Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ToS, QoS, DiffServ Support

Status
Not open for further replies.
NIUX

NIUX

Technical User
Joined
Nov 3, 2002
Messages
50
Location
SA
Hi,
Does any one know wither the below switches/IOS are supporting ToS, QoS, DiffServ/EF or not?

C3548XL 12.0(5)WC5a
Cat4000 12.1(20)E

Cisco 2900XL / 3500XL
Cisco 2950-XX / 3550-XX

Thanks in Advance.
 
Sort by date Sort by votes
2950's and 3550's are diffserv/tos compliant, the 2950's will only read the tag, the 3550's can augment it.

all the other switches are only layer 2 aware..


BuckWeet
 
Upvote 0 Downvote
Thank you BuckWeet
 
Upvote 0 Downvote
Wait, though, just noticed..

What supervisor engine are you running in the 4006, that software code is an IOS number, so if its a supII plus, you can do l3 qos on that as well..

BuckWeet
 
Upvote 0 Downvote
Or sup III

basically any supervisor engine that is running IOS, can do L3 QoS
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

acabezas2014
  • Locked
  • Question Question
Need to create QoS for SNMP and Radius traffic on Cisco 4948 Switches
Replies
0
Views
313
acabezas2014
acabezas2014
atascoman
  • Locked
  • Question Question
3750 to 3850 QoS commands
Replies
1
Views
478
ADB100
ADB100
jeepinbob
  • Locked
  • Question Question
WS-C2960X-24TS-LL and QOS
Replies
0
Views
240
jeepinbob
jeepinbob
jfp23
  • Locked
  • Question Question
MLS QOS to MQC conversion
Replies
0
Views
239
jfp23
jfp23
Zubester
  • Locked
  • Question Question
Enabling QoS on Catalyst 4500X-32
Replies
1
Views
264
chieftan
chieftan

Part and Inventory Search

Sponsor

Back
Top