Jun 23, 2009 #1 dkwtfid MIS Joined Nov 24, 2008 Messages 63 Location US I am looking for the ld and command to check available TN's. Thank you in advance.
Jun 23, 2009 #2 SL1M1 Technical User Joined Feb 10, 2005 Messages 971 Location GB I guess your after the basic digitals and analogues? LD 20 REQ LUU TYPE 2000 (Digitals) TYPE 500 (Analogues)Voice&Data ports Return through for all cards available There are other processes in LD 117 to give you inventory on sets etc but this is probably your quickest way Cheers!! Upvote 0 Downvote
I guess your after the basic digitals and analogues? LD 20 REQ LUU TYPE 2000 (Digitals) TYPE 500 (Analogues)Voice&Data ports Return through for all cards available There are other processes in LD 117 to give you inventory on sets etc but this is probably your quickest way Cheers!!
Jun 23, 2009 Thread starter #3 dkwtfid MIS Joined Nov 24, 2008 Messages 63 Location US For Digitals. Is this giving me the actual cards? I am looking for the tn's that we have available so that we can create a new digital set. Upvote 0 Downvote
For Digitals. Is this giving me the actual cards? I am looking for the tn's that we have available so that we can create a new digital set.
Jun 23, 2009 #4 MossEng MIS Joined Feb 10, 2006 Messages 370 Location GB If you use REQ LUVU, then the system won't output the data TN's associated with a Digital Card, as I assume you're after Voice TN's. Upvote 0 Downvote
If you use REQ LUVU, then the system won't output the data TN's associated with a Digital Card, as I assume you're after Voice TN's.
Jun 23, 2009 Thread starter #5 dkwtfid MIS Joined Nov 24, 2008 Messages 63 Location US Yes I am after available voice TN's. Thank you. Upvote 0 Downvote
Jun 23, 2009 #6 bigindian65 Technical User Joined Dec 27, 2006 Messages 4,597 Location US don't forget LDIS in ld 32 you might have disabled sets, and won't have to built a thing, just enable and cross-cut Mato' Was'aka Upvote 0 Downvote
don't forget LDIS in ld 32 you might have disabled sets, and won't have to built a thing, just enable and cross-cut Mato' Was'aka
Jun 23, 2009 #7 phonz1 Technical User Joined Aug 17, 2007 Messages 1,205 Location US ld 10 and ld 11, right in the header Upvote 0 Downvote