TN802 Cable Pinout 1

[5essfun]

Need pinout for TN802/TN802B Cable. This cable connects the card slot to monitor, keyboard, mouse, Ethernet, modem, and com port for access to the onboard NT computer. Thank you!

 

[4merAvaya]

The TN802(B) is a modified MAP-D board that was used for VoIP trunking in V8 switches. Is that the board that you are looking to access? If I'm not mistaken, both the MAP-D and the IP Trunk card are running UNIX/UNIXware.

Kevin

 

[5essfun]

Yes, that's the board. Avaya documentation I have does not have the pinout of the cable. Operating system is NT on these boards, unlike most Lucent/Avaya which are of course UNIX as you noted. Need cable or pinout. Thanks!

 

[5essfun]

Please help me find the pinout for this cable, or a cable to borrow to pin out myself.

Thank you.

Roger Case
GCI Communication Corp
Anchorage, Alaska

 

[wilsontec]

pair 7 and pair 19 is connect to network.
You can try this.
hope can help you

 

[5essfun]

Thanks Wilson,
I did get the Ethernet port to work with those pair assignments, but I also need the monitor, keyboard, mouse, serial pinouts to configure the IP Trunk parameters under NT.

Roger