Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Avaya G350 Console Cable using Cisco Light Blue flat DB9 to serial 1

Status
Not open for further replies.

dibthree

Technical User
May 3, 2006
398
0
0
US
Need to make a cable and cant remember if this is right?

Cisco Cable RJ45 DB9
re-crimp Cisco blue ribbon cable in this order:
1. light-brown
2. green
3. red
4. blue
5. orange
6. yellow
7. black
8. Grey (or White)

I may have the orange/yellow reversed? Or do PINs 5 and 6 even matter?

I am testing on a G450 but we will be going to a site with a G350. I dont think they use the same cable?

What caused me pause is that the above Pin Out works with the G450.
 


Check this thread: thread690-1567747

- Stinney

“The man who asks a question is a fool for a minute, the man who does not ask is a fool for life.” - Confucius
 
Thanks for replying.

I forgot to login and say I figured it out. My original Pinout worked for the G350 as follows:

Cisco Cable RJ45 DB9
re-crimp Cisco blue ribbon cable in this order:
1. light-brown
2. green
3. red
4. blue
5. orange
6. yellow
7. black
8. Grey (or White)

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top