Feb 24, 2011 #1 esoare Programmer Joined Jun 15, 2005 Messages 199 Location US Tried running some reports on user and couldn't select 2011, the latest year is 2010 that is selectable. Nice way to make sure you upgrade your software, but sucky customer experience! Can others verify this? Is there a work around? Thanks,
Tried running some reports on user and couldn't select 2011, the latest year is 2010 that is selectable. Nice way to make sure you upgrade your software, but sucky customer experience! Can others verify this? Is there a work around? Thanks,
Feb 24, 2011 #2 ron4ron Technical User Joined Sep 10, 2009 Messages 32 Location US A thread last month addressed this ... it worked for me with TM 4 ,not sure about 3.2 http://www.tek-tips.com/viewthread.cfm?qid=1633216&page=40 Upvote 0 Downvote
A thread last month addressed this ... it worked for me with TM 4 ,not sure about 3.2 http://www.tek-tips.com/viewthread.cfm?qid=1633216&page=40
Feb 25, 2011 Thread starter #3 esoare Programmer Joined Jun 15, 2005 Messages 199 Location US Thank ron4ron! I will give it a shot on monday and update the thread! Upvote 0 Downvote
Feb 28, 2011 Thread starter #4 esoare Programmer Joined Jun 15, 2005 Messages 199 Location US It did work. I used your advice and just edited the file. Thanks Again Upvote 0 Downvote