Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Time Restriction for a User

Status
Not open for further replies.

netser

Programmer
Jan 28, 2005
14
TR
We have the restriction that our users can talk over the trunks for only 3 minutes. We configure this from Route Data Block's TFD parameter. But all users affected from this. We want only some of the users affected from this thus we want to cofigure this on a user basis.How we can achieve this? Thanks for help...
 
You might try and build a second RDB and move members over into that route. You could then use the FRL in the RLI to control what route would be selected. entr 0 frl 2; entr 1 frl 1 route used for entr 1 would have TFD set. Only draw back is that if route used for entr 0 is busy calls overflow to entr 1 with TFD.
 
a new route with x number of trunks, then use tgar/targ to allow/dis-allow sets to hit the tfd route. i've done the same with break room phones..

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top