elvislives
MIS
We have a s8500 and the time is off by 20 minutes and it continues to happen. I'm used to going into the system and using set time but apparently that command doesnt work w/ S8500. What am i doing wrong?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Time change on a S8500
- Thread starter elvislives
- Start date
- Status
S8xxx servers have to have their time set through the web interface. Use Internet Explorer and the virtual IP address to log into the server. Open the maintenance window and look for the server date/time link in the left column.
Sounds like you are not using an NTP source to keep the time synchronized.
Kevin
Sounds like you are not using an NTP source to keep the time synchronized.
Kevin
- Thread starter
- #3
elvislives
MIS
I've actually tried that and the ip address is not found so i'm assuming the ip address needs to be set up on our end to access it through the network.
Do you recommend using the NTP feature to sychnronize? One of our technicians said he doesnt recommend it, he said they had problems with it when it went south?
Is it hard to set up the time synchronization?
Do you recommend using the NTP feature to sychnronize? One of our technicians said he doesnt recommend it, he said they had problems with it when it went south?
Is it hard to set up the time synchronization?
- Status
Similar threads
- Question
- Locked
- Question