Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
the DAT72 tape drive cannot find in AIX
- Thread starter chinaix
- Start date
hi,
1) when you don't find, try by lsdev -C | pg, to be sure that the syntax is correct or it is stored as other.
2) using smitty devices, look under tapes
3) put AIX CD1 inside driver, and always in smitty devices go in ".. devices added after.."; fill (F4) /dev/cd0 in devices field: Go. If drivers are already in lpp, this operations usually is not necessary, doing a reboot or a cmfmgr command (the same command launched by smitty: see F6), but if devices drivers are not loaded this is the way to load them (or chgmgr with some command qualifier, see also F6).
bye
vittorio
1) when you don't find, try by lsdev -C | pg, to be sure that the syntax is correct or it is stored as other.
2) using smitty devices, look under tapes
3) put AIX CD1 inside driver, and always in smitty devices go in ".. devices added after.."; fill (F4) /dev/cd0 in devices field: Go. If drivers are already in lpp, this operations usually is not necessary, doing a reboot or a cmfmgr command (the same command launched by smitty: see F6), but if devices drivers are not loaded this is the way to load them (or chgmgr with some command qualifier, see also F6).
bye
vittorio
- Status