TFTP config onto PIX?

[sunyasee]

Hi Can someone tell me the command to TFTP a config back onto a PIX. I have made a backup using the command 'write network' but am unable to work out the command to put the config back onto a PIX?

Thanks for any help.

----

Sunyasee

 

[strayrog]

If the configuration you have on the TFTP server is the one you want your
firewall to load on startup then type this:


copy tftp %parameters% startup-config
reload <enter>


Or, if you want the configuration on the TFTP server to be placed into
memory and be running as soon as the copy is finished, then type this:


Copy tftp %parameters% running-config