i have developed a piece of software which detects how much data has been sent and recieved by a PC, then when it gets to a specified level, say 1 GB it shuts the PC down. This is ok, but i also want the option of being able to just disable all network traffic, when a certain level is reached. Is this possible?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Terminate Network traffic
- Thread starter lcfc
- Start date
without full info of your network etc this is only a stab in the dark, but...
wNetCancelConnection API
wNetCancelConnection2 API
may be worth a look,
good luck!
If somethings hard to do, its not worth doing - Homer Simpson
------------------------------------------------------------------------
A General Guide To Excel in VB FAQ222-3383
wNetCancelConnection API
wNetCancelConnection2 API
may be worth a look,
good luck!
If somethings hard to do, its not worth doing - Homer Simpson
------------------------------------------------------------------------
A General Guide To Excel in VB FAQ222-3383
- Status
Similar threads
- Locked
- Question
- Locked
- Question